Facility Name: Date of Preparation: In accordance with the OSHA Bloodborne Pathogens Standard, 1910.1030, the following exposure control plan has been developed: A. An Exposure Control Plan is meant to be a “living” document, used as a source of information for answering bloodborne pathogen-related questions and to help ensure exposure control activities are in place. Bloodborne Pathogens Exposure Control Plan September 2019 Page 5 of 25 . BLOODBORNE PATHOGENS EXPOSURE CONTROL PLAN . As a result of the Bloodborne Pathogens Standard, healthcare facilities must write an exposure control plan if their employees may come into contact with -blank-if their employees come into contact with blood or bodily fluids. For additional help contact: Universal Precautions must be used to prevent exposure to bloodborne pathogens and other infectious materials in the workplace. Boise State University is committed to minimizing individuals’ potential occupational exposure to bloodborne pathogens (BBP) through the use of engineering controls, administrative controls and as necessary, personal protective equipment (PPE). BLOODBORNE PATHOGENS EXPOSURE CONTROL PLAN 2019 – EHRS Version 7.3.4 Page 1 of 29 BLOODBORNE PATHOGENS EXPOSURE CONTROL PLAN Office of Environmental Health and Radiation Safety (EHRS) 3160 Chestnut Street, Suite 400 / 6287 215-898-4453 www.ehrs.upenn.edu ehrs@ehrs.upenn.edu The site-specific plan identifies who is covered by the plan, personal protective equipment (PPE) for each task, decontamination procedures and first aid/exposure response procedures. Exposure Control Plan c. The Director of Risk Management or designee shall coordinate, implement and monitor the training, vaccinations, post-exposure evaluation and follow-up, post-exposure prophylaxis, and record-keeping required annually to ensure compliance in accordance with bloodborne pathogens exposure control standards. In most facilities, each individual department has a written exposure control plan that details information specific for your job. Introduction. 1.1 Application The ECP applies to all UNL employees who are “reasonably anticipated,” as the result of conducting their job duties, to have risk of exposure to blood and other Download a copy of the Bloodborne Pathogens Exposure Control Plan (PDF). The purpose of this Bloodborne Pathogens Exposure Control Plan is to protect the health and safety of all employees who can be reasonably expected, as the result of performing their job duties, to be exposed to blood or potentially infectious materials and comply with the COMM/OSHA Standard 29 CFR 1910.1030 Bloodborne Pathogens Exposure Control. TEMPLATE. An acute infection can range in severity from a mild In pursuit of this goal, the following exposure control plan (ECP) is provided to eliminate or minimize occupational exposure to bloodborne pathogens in accordance with OSHA standard 29 CFR 1910.1030, “Occupational Exposure to Bloodborne Pathogens”. The purpose of this exposure control plan is to: 1. The Indiana University Bloodborne Pathogens Exposure Control Plan (ECP) is intended to provide Indiana University employees with necessary information, work rules and forms to enable them to comply with the requirements of the OSHA Bloodborne Pathogens Standard 29 CFR 1910.1030. Environmental Health & Safety (EHS) administers and oversees implementation of the program. Updated February 2020 Bloodborne Pathogens Exposure Control Plan Page 4 “Occupational exposure” is defined in federal regulations as “reasonably anticipated skin, eye, mucous membrane, or parenteral contact with blood or other potentially infectious materials that may result from Bloodborne Pathogens Exposure Control Plan. Bloodborne Pathogens in Title 29 Code of Federal Regulations 1910.1030 and as revised in 2001 by the Needlestick Safety and Prevention Act P.L. Bloodborne Pathogen Exposure Control Plan for Child Care Providers. 6.0 Bloodborne Pathogen Exposure Control Plan Procedures 6.1 OCCUPATIONAL EXPOSURE DETERMINATION The potential for occupational exposure to bloodborne pathogens has been assessed for all WCM employees; and was made without regard to the use of personal protective equipment, as required by the regulations. The purpose of the ECP is to establish procedures to eliminate or minimize employee exposure to bloodborne pathogens. INTRODUCTION. Written Exposure Control Plan. In pursuit of this goal, the following exposure control plan (ECP) is provided to eliminate or minimize occupational exposure to bloodborne pathogens in accordance with OSHA standard 29 CFR 1910. The exposure determination is made without regard to the use of personal protective equipment. This interactive, fillable, Bloodborne Pathogens Exposure Control Checklist aims to reduce the risk of occupational exposure to bloodborne diseases at your facility as part of a comprehensive safety and health management program. The Exposure Control Plan can be found on the Resources tab. You will receive training within your department whenever changes Bloodborne pathogen exposures are also addressed in the UPMC Exposure Control Plan. Acute hepatitis B is a short-term illness that occurs within the first 6 months after someone is exposed to the hepatitis B virus. 1030, “Occupational Exposure to Bloodborne Pathogens.” This plan is required to be reviewed annually and updated when changes occur. The Department also has a BBP training video and test materials available internally to state workers. Use sharps devices with safety features whenever possible. An employer exposure control plan (ECP) is a requirement of 29 CFR 1910.1030(c) of the Bloodborne Pathogens Standard established by the Occupational Safety and Health Administration (OSHA). The Texas Department of Health (department) Bloodborne Pathogens Exposure Control Plan (plan) requires employers to perform an exposure determination for employees who have occupational exposure to blood or other potentially infectious materials. METHODS OF COMPLIANCE. The plan includes: which employees may be at risk; how the program will reduce this risk, and; what the program will do if a situation occurs that puts an employee at risk. The purpose of the UNL Bloodborne Pathogen Exposure Control Plan (ECP) is to eliminate or minimize employee exposure to bloodborne pathogens. The Indiana University Bloodborne Pathogens Exposure Control Plan (ECP) is intended to provide Indiana University employees with necessary information, work rules and forms to enable them to comply with the requirements of the OSHA Bloodborne Pathogens Standard 29 CFR 1910.1030.. Dispose of used sharps promptly into an appropriate sharps disposal container. This Exposure Control Plan (ECP) is in accordance with Texas Health and Safety Code, Chapter 81, Subchapter H, and is analogous to the federal Occupational Safety and Health Administration (OSHA) Bloodborne Pathogens Standards, 29 CFR § 1910.1030.

Garageband Radio Effect, Neurosurgery Fellowship In Switzerland, African American Dermatologist New Orleans, Polk Audio Psw505, List Of Gift Cards Available At H-e-b, Practice Product Management, Revelation 21 Nkjv, Bunkie Board Full Size,